Zum Hauptinhalt springen
Rescue & Safety · Recovery & Lifting

Vehicle Recovery Track

车辆脱困垫

A track laid under a wheel to recover a bogged vehicle.

Typische Einsätze

  • Sand and mud recovery off-road
  • Crossing soft ground
  • Self-recovery without a second vehicle
  • Winter driving on snow and ice

Warum eine aufblasbare Konstruktion

  • Stows in the vehicle and is there when needed
  • Spreads the contact patch and restores grip
  • Reusable rather than consumable

Wann dies nicht die richtige Wahl ist

Rating must match the actual vehicle weight. Spinning the wheels on the track destroys the surface, and this needs to be stated plainly in the instructions rather than buried.

Technische Daten werden beim Hersteller verifiziert

Working pressure, membrane thickness, tensile and tear strength, weight, packed volume, deployed dimensions, fire rating and warranty are being verified with our manufacturing partner and independent laboratories. We publish figures when they are documented, not before.

Rescue cushions, lifting bags and impact protection Details senden

Seite aktualisiert 2026-08-29

Häufige Fragen

How much can an air lifting bag lift?
Commercial ranges run from around 1.5 tonnes to 80 tonnes and above per bag. Capacity falls as lift height increases, so the rated figure applies at the initial contact height, not throughout the lift.
What pressure do lifting bags use?
High-pressure bags typically run at around 8 bar and low-pressure bags at under 1 bar, serving different jobs. High pressure gives force in a thin profile; low pressure gives height and conformity.
Can a lifting bag be used as a support?
No. A lifting bag lifts; cribbing and struts support. Personnel must never be under a load held only by an air bag — this is a fundamental rule of technical rescue.

Nennen Sie uns den Einsatzfall.

Wir erstellen zum jetzigen Zeitpunkt keine Angebote. Beschreiben Sie Standort, Klima und Stückzahl — wir antworten mit dem, was wir heute belegen können, und dem, was noch geprüft werden muss.

Details senden